Filter
Top Products
tool coverHow to attach
The
tool cover
is designed with
a
"break-away"
feature which al-
lows
it
to
snap
free
if it is
pushed
open
too
far.
To
reattach,
align
hinges
of
cover
with slots on sides
of tool storage area.
Push cover down to
secure
in
place.
How to clean tools
To
clean
the hose, wipe off dirt with a cloth
dampened
in a mild detergent. Rinse with a
damp
cloth.
Cleaning tools
may
be washed
in
warm
water
with a detergent.
Rinse and air dry before
using.
Cleaning tools
Qr
d_h
U
E"#
When
using clean-
ing
tools, cleaner
handle should be
in
the upright
position
to activate
the
automatic
"brush
roll OFF" and
for
convenience
in
moving the cleaner
from one area to
another.
Turn cleaner OFF
before disconnect-
ing
and connecting
hose
to
hose
tube
(A).
To use
hose, lift
hose
end
as shown.
Select
proper
tool
B. Dusting
brush
may be used
for
carved
furniture,
table tops,
books,
lamps, lighting
fixtures, venetian blinds, baseboards, shut-
ters, and
registers.
C.
Furniture nozzle may be used
for
up-
holstered
furniture,
draperies,
mattresses,
clothing,
automobile
interiors, and
carpeted
stairs.
D.
Crevice tool
may be used
in
tight spaces,
corners
and along edges
in
such
places
as
dresser drawers,
upholstered
furniture,
stairs
and baseboards.
E. Wands
are
used to
give
extra
length
to
your
hose. Use them with any of the above
tools.
F. Powered hand tool
may
be used
for
upholstered
furniture,
carpeted
stairs and
hard-to-reaclr
places.
Attach wand and tools
Attach any tool or wand to tlre
hose
(G)
by
pushing
it firmly
into hose.
Attach
second
wand or tool to wand
(H)
by
pushing
it firmly onto the wand.
Twist wand or tool slightly to tighten or
loosen
the connection.