Filter
Top Products
UNPACKING THE CLEANER
Unpack the cleaner from the carton
and identify the parts shown in Fig. 1.
Remove and dispose of the cardboard
packing.
1. Upper handle section
2. Lower handle section
3. Cleaner base
4, Outer bag assembly
5. Disposable bag
The cleaner assembled will look
like the drawing below,
HANDLE
CORD STORAGE HOOKS
wrap cord around cord
hooks for storage.
ADJUSTMENT LEVER
FOR CARPET PILE \
HEIGHT to adjust the
underside of the cleaner _
(nozzle location) to the
carpet pile height.
PILE HEIGHT
ADJUSTMENT DISPLAY
indicates the four positions
set by the Adjustment
Leverforcleaningvariou,\
carpet piles. Four positions
are: LOW, NORMAL, HIGH,
and SHAG.
HOOD
ON-OFF SWITCH to turn
on, push switch down; to
turn cleaner off, raise the
switch up.
SPRING HOOK place
spring ring over hook to
support the bag.
BAG JACKET outer
covering for throw away
bag.
HANDLE BAIL support
for handle.
CARRYING HANDLE
located underneath handle
bail.
HANDLE RELEASE
LEVER step on lever to
lower handle to operating
and low position.
FURNITURE GUARD
prevents cleaner from
rubbing against furniture.
After identifying each part, you are ready to begin assembling.
3