Filter
Top Products
I
If you have a problem
/
This appliance was inspected thoroughly and was in good operat-
;
ing condition when it was shipped from the factory. If a minor
j
problem occurs, it usually can be solved quite easily when the
cause is found. Therefore, this check list is provided for your
convenience.
Problem Possible cause Possible solution
Cleaner
1. Not firmly plugged in.
1. Plug cord in firmly.
won’t 2. No voltage In wall plug.
2. Check fuse or breaker.
TM
3. Blown
fuseMpped
3.
Replace fuse/reset
breaker.
breaker.
Cleaner
won’t
pick up
1. Broken or worn agitator
belt.
2. Agitator brushes worn.
3. Bag full
4.
Obstruction in cleaner.
5. Bag not opening.
6. Incorrect carpet height
setting.
1. Replace belt.
2. Replace brushes.
3. Change paper bag.
4. Clear dirt duct
and/or dirt tube.
5. Check for firm bag
connection.
6. Move nozzle control
lever to type of carpet
being cleaned.
Cleaning
1. Hose clogged.
1. Remove hose and tools;
tools won’t
remove obstruction.
pick up
Cleaner
1. ‘Power Drive’ belt broken 1. Replace belt.
won’t
or worn.
self propel 2. Self Propel control button 2. Slide button to ON.
in OFF position.
Lubrication
The motor is equipped with self-lubricated bearings.
Do not
add
lubricant to the motor; it could cause damage.
The agitator is equipped with two ball bearings that should be
lubricated periodically by a Hoover Factory Service Center or an
Authorized Hoover Warranty Service Dealer (Depot).
24