Filter
Top Products
How to replace ‘Power Drive’ belt
Disconnect cleaner from electrical outlet and detach
hose from cleaner.
To replace the (small) ‘Power Drive’ belt it is necessary to first
remove the bottom plate, agitator and the larger
agitator’belt,
as
shown on the previous pages.
Note: It may not be necessary to change both belts at the same
time.
Remove old ‘Power Drive’ belt.
Place new belt on motor pulley
first, then on drive pulley.
PULLEY*
Lettering on belt should be
visible and not against pulleys.
Replace agitator belt, agitator
and bottom plate, following
instructions under “How to
replace agitator belt”.
19