Hoover SSN1700 Carpet Cleaner User Manual


 
1
IMPORTANT SAFETY REMINDERS
This cleaner should only be used for domestic cleaning, as described in this user guide.
Please ensure that this guide is fully understood before operating the appliance. Use only
attachments recommended or supplied by Hoover.
When using cleaning tools ensure to always steady the product with your other hand.
This will ensure the product does not fall while in use.
WARNING: Danger of scalding. This product is very hot when used. Avoid any contact
with steam.
WARNING: Electricity can be extremely dangerous. This appliance must be earthed.
This plug is tted with a 13 amp fuse (UK only).
IMPORTANT: The wires in the mains power lead are coloured in accordance with the
following code: Blue – Neutral Brown – Live
AFTER USE: Switch the cleaner off and remove the plug from the electricity supply.
Always switch off and remove the plug before cleaning the appliance or attempting any
maintenance task.
SAFETY WITH CHILDREN, ELDERLY OR THE INFIRM: This appliance is not
intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the
appliance.
HOOVER SERVICE: To ensure the continued safe and efcient operation of this appliance
we recommend that any servicing or repairs are only carried out by an authorised Hoover
service engineer.
IT IS IMPORTANT THAT YOU DO NOT:
Leave the cleaner unattended while switched on.
Unplug by pulling on the cord.
Handle the plug or product with wet hands.
Use detergents or liquids other than water inside the product.
Direct steam towards equipment containing electrical components, such as the interior
of ovens.
Put the cleaner in water or other liquids.
Position the cleaner above you when cleaning the stairs.
Use your cleaner out of doors.
Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours
as this may cause risk of fire / explosion.
Stand on or wrap the power cord around arms or legs when using the cleaner.
Use the appliance to clean or direct steam towards people, animals or plants.
Continue to use your cleaner if it appears to be faulty. If the power cord is damaged
stop using the cleaner IMMEDIATELY. To avoid a safety hazard, an authorised
Hoover service engineer must replace the power cord.
GETTING TO KNOW YOUR CLEANER
A. Cleaner main body
B. Handle
C. Steam Release Trigger
D. Power Cord
E. Upper cord Clip
F. Lower cord clip
G. On/Off Button
H. On Indicator Light (Blue)
I. Steam Ready Indicator Light (Green)
J. Floor Brush
K. Floor Head
L. Floor brush Release Pedal
M. Clean Water Tank
N. Textile Pad (x2)
O. Carpet Glider
P. Hard Water Filter
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Insert the handle into the cleaner main body until it locks into position. [2]
2. Assemble the main body of the cleaner to the oor Brush. [3]
3. Assemble the cleaner with oor brush to the oor head. [4]
USING YOUR CLEANER
BEFORE YOU BEGIN CLEANING
1. Remove the clean water tank up and out from the cleaner main body. [5]
2. Twist the cap anti clockwise and remove. [6]
3. Fill the clean water tank with cold tap water. Replace cap. [7] Do not add any
chemicals,detergents or perfumes to the clean water tank.
4. Re-t the clean water tank to the cleaner ensuring the hard water lter is in place.
5. Attach a textile pad to the base of the oor head. [8]
IMPORTANT: Always unplug the cleaner when adding water or changing a textile
pad.
NOTE: Wash the textile pad prior to use to remove any lint.