Filter
Top Products
3.
Lift out lens.
5. Replace lens by inserting
plastic projections into open-
ings in cleaner.
The belts
There are two belts on your
cleaner. One belt drives the
agitator; the other operates the
Power Drive”” pulley, which
operates the Self Propel
feature.
When buying new belts, you
should always insist on genuine
YOOVER
parts. Other belts
may not meet the Hoover
design and quality control
standards. They may not
operate the agitator or ‘Power
Drive’ transmission correctly
and may cause damage.
4. Pull old bulbs straight out of
sockets. Push each new bulb
straight into socket until locked in
place.
Excessive force
is
not
required.
6. Press lens firmly at center
and sides while lifting slotted
edge with screwdriver.
‘POWER
DRIVE’
BELT-
BELT
15