Filter
Top Products
How to assemble
1.
Connect hose
insert hose end with cord into
opening of cleaner, lining up
largest projection on hose with
largest notch of opening. Turn
hose to the right to tighten.
To disconnect, depress latch, and
turn hose to the left.
2. Attach wands,
tools and nozzle
To attach hose to extension wand
or tool, turn plastic latch ring on
hand grip until outer slot lines up
with inner slot.
Push hand grip down onto wand or
tool so that button projection fits
into slot. Turn latch ring to lock in
place. Attach second wand and
nozzle or tools in the same manner.
Reverse procedure to remove
wand, tool or nozzle.
Rug and floor
nozzle
The combination rug and floor
nozzle has been designed to do
an efficient cleaning job on both
carpet and hard surface floors.
Hard surface floors
Lock brushes to clean bare floors
by sliding indicator to BARE
FLOOR.
Rugs
Release brushes to clean rugs or
carpet by sliding indicator to RUG.
5