Filter
Top Products
LOWER HANDLE
Place
upper
and
lower
handle
sections
on
a
flat
surface
with
cord
hooks
on
top.
With
hands
on
sides
of
handle
sections,
push
sections
together
firmly
until
they “click”
into
place
(Fig.
1).
*Be careful not to press against the rod extending from the lower
handle. (Fig. 2) If the rod breaks or bends, the cleaner will not
work properly. Do not push handle together with your hands on
the ends of the sections.
Note:
The
small red tab
above
the
ON/OFF
switch
is
for
shipping
purposes only
and
may
fall
off
during
assembly.
if
it
does
not
fall
off,
the
tab
will
be
removed
during
the
final
steps
of
assembly.
“UP”
CORD PROTECTOR (slide
+)
*ROD
LOWER HANDLE
SWITCH
TAB HANDLE
Turn handle over. Insert large
“y-l
~~~{~$~~~with
Make sure
rectangular
end
is
pushed into the handle
as
far as
possible.
(Fig.
3)
*ROD
CORD PROTECTOR
Slide cord protector toward
upper handle.(Fig. 2)
Continued
3
4 ,