Filter
Top Products
leaning to
Some models come with tools; for
others, tools are available at
additional cost from your Autho-
rized Hoover Dealer (Depot), a
Hoover Factory Service Center or
by writing to The Hoover Company,
North Canton, Ohio 44720
The tool set includes a hose, wand,
crevice tool, furniture nozzle and
dusting brush.
:
A. Attach hose to
cleaner
Turn cleaner OFF before attach-
ing or removing hose.
With cleaner handle in
upright
position,
open hose door and
Insert
hose connector until locked
in position. Suction will automati-
cally be diverted to the hose when
cleaner is turned on.
To remove hose, press latch on
hose connector and pull up.
Note: Hose must be removed
from hose door when cleaning
carpet and rugs to insure proper
cleaning performance.
B. Select proper
cleaning tool
1. Dusting brush
may be used for
carved furniture, table tops, books,
lamps, lighting fixtures, Venetian
blinds, baseboards, shutters, and
registers.
2. Furniture nozzle
may be used
for upholstered furniture, draper-
ies, tapestries, mattresses,
clothing, automobile interiors, and
carpeted stairs.
3. Crevice tool
may be used in
tight spaces, corners and along
edges in such places as dresser
drawers, upholstered furniture,
stairs, and baseboards.
4. Wand
used to give extra length
to your hose. Use it with any of the
above tools.
15
CAUTION: Agitator continues to
rotate while cleaner handle is in
upright position. Avoid tipping
cleaner or setting it on furniture,
fringed area rugs, or carpeted
stairs during tool use.
/9
2