Filter
Top Products
The belt on your HOOVER cleaner causes the agitator to rotate and is
important for the effective operation of the cleaner. The belt is located
under the bottom plate of the cleaner and should be checked from time to
time to be sure it is in good condition.
When to replace
To check belt, remove bottom plate as shown in “How to replace belt.”
Replace belt if it is stretched, cut or broken.
What to buy
To assure effective operation, use only genuine HOOVER belts with your
cleaner. When purchasing a new belt, ask for Hoover part No. 38528-027.
How to replace
Disconnect cleaner from
ekctri-
cal outlet.
1. Place handle in operating
position and turn cleaner over.
To remove bottom plate,
insert
end of flat screwdriver into wide
area of right-hand slot and push
handle of screwdriver to the rear.
Repeat in left-hand slot.
2. Rotate plate and remove from
cleaner body.
3. Remove hood as directed in
steps l-4 of
“How to replace
headlight.”
20