Filter
Top Products
8
Floor care hints
Floors may be difficult to care for when
not treated properly. Refer to the chart
below for solutions to floor problems.
Problem: Slippery floor
Problem: Dull floor
Problem: Streaked floor
Po s s i ble cause
Possible solution
• Too mu ch wax.
• Remove wax. Apply thin even coat.
• D e t e rgent not rinsed from floor.
• Remove wax. Rinse detergent from
floor before waxing.
• Floor not dry when wax applied.
• Remove wax. Let floor dry
t h o r oughly before re w a x i n g .
• Floor not polished pro p e r ly.
• Polish with power scrub and cleaning
b r ushes, then buff .
Possible cause
Possible solution
• Not enough wax.
• Apply another thin coat of wax.
Polish and buff.
• Floor not dry when wax applied.
• Clean and rewax floor.
• Floor not clean when wax applied.
• Clean and rewax floor.
Possible cause
Possible solution
• Uneven application of wax.
• Clean and rewax floor. Apply wax
evenly.
• Heavy build-up of wax.
• Remove wax, then apply thin coat.
• Applying one type of wax over
another.
• Clean and rewax floor. (Use only
one type of wax on floor.)
• Oil mop used on floor.
• Clean and rewax floor. (Do not use
oil mop on waxed floor.)
Problem:Yellow or gray floors
Possible cause
Possible solution
• Too many applications of wax.
• Clean and rewax floor. Apply thin coat
of wax.
• Too much wax in areas of light
traffic.
• Clean and rewax floor. (Apply only
one coat of wax in these areas.)
Problem: Scratched floor
Possible cause
Possible solution
• Gritty dirt on floor.
• Clean and rewax floor. If floor is
waxed, only wax gets scratched.
(Use vacuum cleaner to remove
dirt.)
Problem: Black marks
Possible cause
Possible solution
• Scuffing from rubber heals.
• To remove from waxed floor, damp-
en fine steel wool with wax and rub
spots, then polish.
Problem: Powdering of wax
Possible cause
Possible solution
• Self polishing wax applied over
solvent-base wax.
• Clean and rewax floor. (Do not mix
waxes.)
• Floor not clean when wax is
applied.
• Clean and rewax floor.