Hoover E1 Vacuum Cleaner User Manual


 
CAUTION: TO REDUCE THE RISK OF
DAMAGE:
Avoid picking up hard, sharp objects with this product, as they may cause
damage.
Store in a dry place. Do not expose machine to freezing temperatures.
To assist in reducing drying time, be certain the area is well ventilated when using
detergents and other cleaners with this machine.
To help prevent matting and resoiling, avoid contact with carpets until they are dry.
Keep children and pets away from carpets until they are completely dry.
Do not store extractor with solution in tanks.
Sitting in one place while running can cause damage.
4
WARNING: This product contains chemicals known to the State of California to cause
cancer, birth defects or reproductive harm. WASH HANDS AFTER HANDLING.
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric
shock. This appliance is equipped with a cord having an equipment-grounding
conductor and grounding plug. The plug must be inserted into an appropriate
outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
WARNING: Improper connection
of the equipment-grounding conductor can
result in a risk of electric shock. Check with
a qualified electrician or service person if
you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug
provided with the appliance--if it will not fit
the outlet, have a proper outlet installed by
a qualified electrician.
This appliance is for use on a nominal 120-volt circuit and has a grounding attachment
plug that looks like the plug illustrated in the sketch above. Make sure that the
appliance is connected to an outlet having the same configuration as the plug. No
adaptor should be used with this appliance.
GROUNDED
OUTLET BOX
GROUNDING PIN
GROUNDED
OUTLET
• NOTICE •
An internal thermal protector has been designed into your cleaner to protect it from over heating.
When the threamal protector activates the cleaner will stop running. If this happens proceed as
follows: 1. Turn cleaner OFF and siconnect it from the electrical outlet. 2. Inspect the nozzel and
tank inlet opeings for any obsrtuctions. Clear obstructions if present. 3. When cleaner is
inplugged and motor cools for 30 minutes, the thermal protector will deactivate and cleaning
may continue.
If thermal protector continues to activate after following the above stepes, your cleaner may
need Servicing