Filter
Top Products
4
2. How to use
2-2
ON-OFF switch
Depress switch to turn cleaner ON
and OFF.
To reduce the risk of electric shock,
this appliance has a polarized plug
(one blade is wider than the other).
This plug will fit in a polarized outlet
only one way. If the plug does not fit
fully in the outlet, reverse the plug.
If it still does not fit, contact a quali-
fied electrician to install the proper
outlet. Do not change the plug in
any way.
Rug and floor nozzle
The combination rug and floor nozzle
has been designed to do an efficient
job on both carpet and hard surface
floors.
Hard surface floors
Lock brushes to clean bare floors
by sliding indicator to BARE
FLOOR.
Rugs
Release brushes to clean rugs or
carpet by sliding indicator to RUG.
Cleaning tools
A variety of useful cleaning tools,
made for your cleaner, is shown.
Any tool which does not come with
your model is available at additional
cost from your Authorized Hoover
Dealer (Depot), a Hoover Factory
Service Center, by writing to The
Hoover Company, North Canton,
Ohio 44720, or through The Hoover
Company online at
www.hoovercompany.com
1-5
Attach second wand and nozzle or
tools in the same manner.
Reverse procedure to remove wand,
tool or nozzle.
2-1
The assembled cleaner will look
like the drawing.
1
2
3
4
5
6
7
8
9
10
11
Cleaner description
Operate cleaner only at voltage specified
on data plate on bottom of cleaner.
1. Combination rug and floor
nozzle
2. Plastic latch ring is located
on extension wands and hand
grip; rotate ring to attach wands
or cleaning tools.
3. Large wheels provide easy
towing when cleaner is pulled
over carpet, area rugs and door
sills.
4. Carrying handle
5. On-off switch
6. Bag door lock
7. Extension wands are used
with the rug and floor nozzle. If
added length is desired when
using cleaning tools, one or both
wands may be used.
8. Hose
9. Hand grip
10. Crevice tool
11. Multi-purpose brush
This cleaner is intended for
household use.