Filter
Top Products
4
Align end of hose with projections
(A) over slots (B) in dirt duct.
Slide hose into duct (B) and twist
hose to lock it into place.
Snap ends of dusting brush (A),
crevice tool (B) and furniture nozzle
(C) into clips as shown.
1-10
1-5
1-8
1-6
1-7
1-9
1-12
Place nuts in recessed areas on
front of handle. Hold each nut in
place while tightening each bolt
securely with a Phillips screw driver.
A
B
B
A
C
D
B
E
C
D
Place bottom of cup into cleaner.
Pivot cup and snap in place.
Position cord on back of cleaner as
shown and press cord into clip.
1-11 1-13
Place smaller unridged end of wand
into bottom of rack. Snap wand into
clip. Repeat with other wand.
Attach hose
Position tools
Note: Hose must be connected as shown for
all operations.
Lift hose tube cover (C).
Position hose over hose hook (D)
and into hose tube (E).
Some models include a long crevice
wand (D) instead of the short
crevice tool. The crevice wand is
packed inside one of the extension
wands. Place it inside a wand for
storage on the cleaner as well.