Filter
Top Products
5
Continued
➜
1. Handle
2. Hose
3. ON/OFF switch: located
on left rear corner of
cleaner body
4. Carrying handle
5. Bag door
6. Check bag indicator
7. Stair cleaning handle:
located on lower edge of
dirt cup.
8. Headlight
9. Furniture guard: helps
prevent cleaner from
marking furniture.
10. Nozzle control knob:
slide knob to correct set-
ting for height of carpet
being cleaned.
11. Wands
12. Cord hooks: wrap cord
around hooks for storage.
The top hook rotates right
or left for easy cord
release.
13. Crevice tool
14. Handle release lever:
step on lever to lower
handle to operating or
low positions.
15. Dusting brush
16. Final filter exhaust
17. Furniture nozzle
18. Hose hook
19. Crevice wand*: stores
inside of extension
wand
*Available on
some models
Cleaner description
A
B
2. How to use
Operate cleaner only at
voltage specified on data
plate on bottom of
cleaner.
This cleaner is intended
for household use.
Polarized plug
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. Do not change the plug in
any way.
ON-OFF switch
Plug cord into electrical outlet.
To turn cleaner ON, push switch (A) toward
front of cleaner.
To turn cleaner OFF, push toward back of
cleaner.
Cord clip
To help keep the cord out of the way while
vacuuming, position cord down into cord
clip (B) located between top cord hook
and handle.
2-2
2-3
2-1
1
12
12
15
4
8
13
19
16
9
10
6
7
14
11
17
3
5
2
18