Filter
Top Products
– 13 –
Functions of the Keypads (cont’d)
11. # This key can be used for "Quick
Arming" of the system without use of a
security code (if programmed).
[FUNCTION] On Voice keypads, enables
the desired voice or volume function.
12. 0
[VOICE] On Voice keypads, enables the
RECORD, VOLUME and PLAY
functions.
13. ∗
READY Used to display all open
protection zones.
[STATUS] On Voice keypads, a
momentary press of the STATUS key
annunciates the current system status.
Pressing the STATUS key a second
time annunciates and displays system
and/or zone faults (if they exist).
14. KEYS 0–9: Used to enter the security
code(s) and to perform their associated
system functions.
15. MIC
On voice keypads, microphone for
Message Center recordings.
16. MESSAGE LED INDICATOR: (RED)
On Voice keypads, flashes red when
message waiting or lights red (steady)
when in record mode.
17. READY LED INDICATOR: (GREEN)
Lit when the system is
ready to be
armed (no faults present). While the
system is disarmed, this indicator will
go on and off as protection zones are
closed and opened.
18. ARMED LED INDICATOR: (RED)
Lit when the system has been armed.
19. FUNCTION KEYS: Keys A, B, C, D
may have been programmed for a
variety of functions, including panic
(emergency) functions. For details, see
the Function Keys section.
20. INTERNAL SPEAKER: The built-in
speaker mimics the alarm sounder
during alarms, and will also "beep"
during certain system functions. The
speaker also provides voice playback for
any recorded messages.