Filter
Top Products
– 10 –
Functions of the Keypads
Functions of the KeypadsFunctions of the Keypads
Functions of the Keypads
NOTE: The functions printed directly on the
keys indicate their primary purpose; the
functions printed under some of the keys
(shown in brackets under the respective key),
indicate their alternate or secondary purpose.
DISPLAY WINDOW
Alpha Display Keypads:
2-line, 32-character
Liquid Crystal Display (LCD) keypads that display
protection points, system status, and messages.
Fixed-Word Display Keypads:
Display
protection zone ID and system status messages using
pre-designated words in the LCD display area.
0
[VOICE]
On Voice keypads, enables the RECORD,
VOLUME and PLAY functions.
1 OFF
Disarms burglary portion of the
system,
silences alarms and audible trouble indicators, and
clears visual display after problem's correction.
[RECORD]
On Voice keypads, used in conjunction
with the FUNCTION and VOICE keys to record up
to a 2.5-minute message.
2 AWAY
Arms the entire burglary system,
perimeter and interior.
[VOLUME]
On Voice keypads, used in conjunction
with the FUNCTION and desired volume control
keys ↑ [3] or ↓ [6] to adjust the volume of a recorded
message or voice system status.
3 STAY
Arms perimeter portion of burglary
system only. Interior protection is not armed,
allowing movement within premises without causing
an alarm. If pressed twice in succession, arms
system in Night-Stay mode.
[PLAY]
On Voice keypads, used in conjunction with
the FUNCTION and VOICE keys to play the
recorded message.
[ ↑ ]
On Voice keypads, used in conjunction with the
FUNCTION and VOLUME keys to raise the
message and voice system status volume.
4 MAXIMUM Arms the entire burglary system,
perimeter and interior, but without entry delay.
Entering via an entry/exit door will cause an alarm.
5 TEST
Tests the system and alarm sounder if
disarmed. Refer to Testing The System section for
test procedures.
6 BYPASS
Removes individual protection zones from
being monitored by the system.
[ ↓ ]
On Voice keypads, used in conjunction with the
FUNCTION and VOLUME keys to lower the message
and voice system status volume.
7 INSTANT
Arms in manner similar to the STAY
mode, but without the entry delay feature.
8 CODE
Used to assign additional security codes
and attributes for other users of the system.
9 CHIME
Turns
CHIME mode on and off.
When on, the
opening of windows or doors while the system is disarmed
sounds 3 beeps at the keypad(s).
KEYS 0–9:
Used to enter the security code(s) and to
perform their associated
system functions.
∗ READY
Used to display all open protection zones.
[STATUS]:
On Voice keypads, a momentary press of the
STATUS key annunciates the current system status.
Pressing the STATUS key a second time annunciates and
displays system and/or zone faults (if they exist).
# T
his key can be used for "Quick Arming" of
the system without use of a security code (if
programmed).
[FUNCTION]
On Voice keypads, enables the desired
voice or volume function.
FUNCTION KEYS:
Keys A, B, C, D may have been
programmed for a variety of functions, including panic
(emergency) functions. For details, see the Function Keys
section.
ARMED LED INDICATOR:
(RED) Lit when the
system has been armed.
READY LED INDICATOR:
(GREEN) Lit when the
system is
ready to be armed (no faults present). While the
system is disarmed, this indicator will go on and off as
protection zones are closed and opened.
MESSAGE LED INDICATOR:
(RED) On Voice
keypads, flashes red when message waiting or lights red
(steady) when in record mode.
MIC:
On voice keypads, microphone for Message Center
recordings.
INTERNAL SPEAKER:
The built-in speaker mimics
the alarm sounder during alarms, and will also "beep"
during certain system functions. The speaker also
provides voice playback for any recorded messages.