Honeywell T87N Thermostat User Manual


 
T87N/T87K • Owner's Manual
2
System Types
Gas or oil heat (T87K)
Gas, oil, or electric heat with air
conditioning (T87N)
Warm air, hot water, high-efficiency
furnaces, heat pumps, steam, gravity
Heat only
Heat only with fan (T87N)
Heat only, 2-wire, and 3-wire hot-water
valve (power open and close valves)
(T87K)
Cool only (T87N)
System Settings (T87N)
Heat, Off, Cool
Fan Settings (T87N)
Auto, On
Specifications
Temperature Range
40° to 90°F (4.5° to 32°C)
Shipping Temperature
-20° to 120°F (-28.9° to 48.9°C)
Operating Relative Humidity
5% to 90% (non-condensing)
Electrical Ratings
Voltage: 20–30 VAC
Running current: 0.02–1.0A
Install the thermostat about 5 feet (1.5 m) above the floor in an area
with good air circulation at average temperature.
Do not install in locations where the thermostat can be affected by:
Drafts or dead spots behind doors and in corners
Hot or cold air from ducts
Sunlight or radiant heat from appliances
Concealed pipes or chimneys
Unheated/uncooled areas such as an outside wall behind the thermostat
NO
NO
NO
Installation tips
Product application
This thermostat provides electronic control of:
24 VAC heating systems (T87K)
24 VAC heating and cooling systems (T87N)