Filter
Top Products
12
69-1153
for rate 1 is displayed (note the indicator on the
thermostat display as shown in Fig. 1). Use the
Warmer and Cooler keys to set the offset value.
Repeat the procedure for each rate. After you
have entered the last offset value, press the
Run Program key.
Entering a Cooling Schedule
Press the System key until the thermostat
displays the word COOL to indicate you are in
the cooling mode.
Enter cooling temperatures for the WAKE,
LEAVE, RETURN and SLEEP times by
following the same instructions as for Entering a
Heating Schedule above. If you subscribe to
Time-of-Use Pricing, enter offset values for the
cooling season as you did for the heating
season.
Step 3—Set the System
and Fan Controls
After programming the thermostat, set the
system and fan controls as follows:
System Control
If you have a conventional heating/cooling
system, the system can be set to: HEAT, COOL
or OFF. If you have a heat pump system, the
system can be set to: HEAT, EM. HEAT, COOL
or OFF.