3Part Number 550-110-739/0703
GSA
Gas-Fired Steam Boilers – User’s Information Manual
To locate Lighting Instructions:
Find your boiler model number on boiler nameplate (begins with GSA). Read the valve manufacturer’s model and
name on the boiler gas valve. Locate the correct “Lighting Instruction” using the table below. Use only the Instructions
applying to your boiler model and gas valve. If you are in doubt which to use, please contact your boiler installer/
technician for assistance.
Maintain your boiler using this schedule:
GSA standing pilot
With gas valve:
Boiler models Page
Honeywell VR8200 or VR8300 GSA-075 through GSA-250
4
Robertshaw 7200 GSA-075 through GSA-175
5
Service technician
(covered in Boiler Manual — for use only by a
qualified service technician)
Owner maintenance
(see pages 6 – 8 for instructions)
A
NNNUAL
START
-
UP
❏ Inspect:
• Reported problems
• Boiler area
• Air openings
• Flue gas vent system
• Pilot and main burner flames
• Piping
• Boiler heating surfaces
• Burners and base
❏
Service:
• Gauge glass
❏
Start-up:
• Perform start-up per manual
❏
Check/test:
• Gas piping
• Boiler waterline
• Limit controls and cutoffs
• Boiler relief valve
❏
Review:
• Review with owner
❏ Daily • Check boiler area
• Check boiler pressure gauge
• Check air openings
❏ Monthly • Check boiler and system piping
• Check venting system
• Check/operate boiler relief
valve
• Check pilot and main burner
flames
❏ Periodically • Test low water cutoff
❏ End of season • Shut down procedure