Filter
Top Products
62-0131—2
6
Q7300L SERIES 2000 COMMERCIAL THERMOSTAT SUBBASE
Mounting Thermostat on Subbase
Mount the thermostat on the subbase after the subbase is
installed.
1. Engage tabs at the top of the thermostat and
subbase. Fig. 11.
2. Press lower edge of case to latch.
NOTE: To remove the thermostat from the wall,
first pull out at the bottom of the thermo-
stat; then remove the top.
IMPORTANT
Refer to the thermostat installation instructions for
Installer Setup, Settings, Installer System Test
and Troubleshooting information.
Fig. 11. Mounting thermostat on subbase.
M4824A
B.
PRESS LOWER EDGE OF CASE TO LATCH.
A.
ENGAGE TABS AT TOP OF THERMOSTAT AND SUBBASE OR WALLPLATE.