Filter
Top Products
15 69-0643—1
Problem Check Action
Energy saving — Program dial for proper day Turn timer ahead 12 hours. Turn
temperature or night phase. knob clockwise only.
program is
12 hours.
Rooms do not — Timer program for heating Move red pin one-half hour earlier
warm up at the system may need more time on the program dial.
programmed to warm up rooms.
time.
Temperature — Program pins for correct time Relocate pins to desired settings.
change occurs locations.
at the wrong time.
Room temperatures — Positions of thermostat set Reset to desired temperatures.
are not correct. point levers.
— Position of subbase system Move to desired operating position.
switch (heating-cooling model).
Troubleshooting (Continued)
2
(continued)