Filter
Top Products
22 69-1713
“Cool On” is
not shown in
the display.
Set System setting to Cool and set the
temperature setting below the room
temperature. If “Cool On” is shown solidly
in the display, but the cooling system does
not turn on, see “Cooling system does not
turn on” in Troubleshooting Tips.
“Heat On” is
flashing in
the display
(heat pumps
only).
Compressor minimum-off timer is active.
Wait up to five minutes for the heating
system to turn on.
“Cool On” is
flashing in
the display.
Compressor minimum-off timer is active.
Wait up to five minutes for the cooling
system to turn on.
Troubleshooting Tips (Cont)
If . . . Then . . .
69-1713.fm Page 22 Tuesday, June 8, 2004 10:33 AM