Filter
Top Products
69-1713 15
Auto Changeover
Auto Changeover is a feature used in climates where
both air conditioning and heating are used on the same
day. The Auto setting appears only if the thermostat is set
up for Auto Changeover by your heating and air
conditioning dealer. In some installations, Auto may be
the only system selection.
The following pages in this Auto Changeover section
provide an example of how to change both the cool and
heat temperature settings when the system is set to Auto.
When you are adjusting the temperature setting, if
“!Cool” or “"Heat” appear in the display, the
temperature setting of the opposite mode is also being
adjusted. The thermostat automatically keeps the cool
and heat temperature settings three degrees apart
(called deadband). This three-degree deadband is not
adjustable.
69-1713.fm Page 15 Tuesday, June 8, 2004 10:33 AM