Filter
Top Products
– 39 –
USER FUNCTIONS
USER FUNCTIONSUSER FUNCTIONS
USER FUNCTIONS
Speaker Phone Feature
LYNXR-2 Series Speaker Phone Functions
To place a call using the Speaker Phone:
[#] + AUX and dial the desired phone number.
To answer a call using the Speaker Phone: [#] + AUX
To flash (switch between two calls using call waiting):
AUX
To hang up:
OFF
To activate/deactivate (toggle) ringer: [#] + VOLUME + AUX
To return the keypad to telephone mode after disarming the system: [#] + AUX
NOTES: (1) The speaker phone ringer can only be enabled/disabled when the speaker phone mode is
not active. The system will ring once to confirm the ringer is enabled.
Entering [#] +
VOLUME + AUX a second time will disable the ringer. No ring will confirm
that the ringer is disabled.
(2) The speaker phone ringer will not ring when an alarm, trouble or entry/exit delay are
sounding.
(3) The LYNXR-2 Series speaker phone does not provide a “hold” feature.
NOTE
If you are using pulse (rotary)
dialing, allow enough time for the
control to finish dialing the last
digit you dialed, before dialing
the next digit.