Honeywell HZ0360 Electric Heater User Manual


 
SAFETY FEATURES
The 360° Surround Heater™ is equipped with several devices and features for added protection:
360° SafetyTIP™ is an all-around tip-over switch that disables the heater if it is accidentally
tipped in any direction.
A high temperature safety control prevents overheating.
This heater is also equipped with a thermal cut-off fuse that will permanently shut down the
heater should it operate at a higher than normal temperature.
This heater was created using a high quality safety plastic.
CLEANING
We recommend that the 360° Surround Heater™ be cleaned at least once a month and before
off-season storage.
Turn the heater OFF (
o) and unplug it. Allow it to cool.
Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES,
POLISHES OR ANY CHEMICAL SOLUTION.
STORAGE
Clean your 360° Surround Heater™ using the above-mentioned steps. Wrap the cord around the
unit. Place in its original box and store it in a cool, dry place.
This heater does not disassemble.
TROUBLESHOOTING
If your 360° Surround Heater™ shuts off unexpectedly or fails to operate, one of your heater safety
features may have been activated to prevent overheating.
Be sure it is plugged in and that the electrical outlet is working.
Check your Thermostat Control setting. The unit may simply be off because you have reached
your desired heat setting.
Check for any obstructions. If you find an obstruction, turn the heater OFF (
o) and unplug it.
Allow the heater to cool completely, then remove the obstruction. Wait at least 10 minutes, then
re-plug the heater in and follow the OPERATION instructions.
ELECTRICAL RATING
This product is rated 12.5 Amps (1500 watts) @ 120V, 60Hz.
HZ-0360_OM v7.0.qxd:HZ-2200-3200-3220_OM_Rev1 4/15/10 12:08 PM Page 4