Filter
Top Products
8
Disinfecting directions: Disinfect following scale removal
DO NOT DISINFECT
demineralization
cartridge.
Set aside top housing,
clear protective cover,
water pump and water
hose.
1
g
a
l
Soak water pump
components, mist nozzle
and clear protective
cover in water reservoir
of the main housing if
these parts were not
cleaned on the top rack
of dishwasher.
NOTE: USING MORE
THAN 1 TB OF BLEACH
PER GALLON OF
WATER WILL RESULT
IN DAMAGE TO YOUR
HUMIDIFIER.
Add 1 TB of bleach to 1
gallon water. Add ½ to
¾ gallon of water/bleach
solution to water reservoir
of the main housing.
Wipe top cover with remaining
water bleach solution if these
parts were not placed in
dishwasher. Place hose in bleach
solution. Soak for 15-20 minutes.
Thoroughly rinse base and any
parts not placed in dishwasher
until the smell of bleach is gone.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
CLEANING: HUT-220 Series (continued)
Note: For best cleaning results hose should be soaked in the base and then rinsed with clean,
cool water until the smell of bleach is gone.