6
EasySet
™
Control Operation (Models HCM-635, HCM-645, HCM-646)
POWER
CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH
WET HANDS AS AN ELECTRICAL SHOCK COULD
OCCUR.
• With the power OFF, plug the filled humidifier into a polarized
120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE
OUTLET; it will only fit one way.
STEP 1: POWER
• Press the Power button to start the humidifier. Your humidifier
will automatically start on High power, Continuous Mode (Fig. 6).
• To turn your humidifier OFF simply press the Power button
again.
STEP 2: OUTPUT / FAN SPEED CONTROL
Your unit has three output levels/fan speeds:
HIGH: For fast humidifying
MED: For everyday moisture control
LOW: For minimum operation (ideal for nighttime use)
• Push the up button (+) to increase output level and push the
down button (-) to decrease output level. The LED's will
illuminate to reflect which speed you have selected (Fig. 7).
STEP 3: SET HUMIDITY
• Set your desired humidity anywhere between 35% and 55%.
• Push the up button (+) to increase desired humidity and push
the down button (-) to decrease desired humidity. The LED's
will illuminate to reflect which desired humidity level you have
selected (Fig. 8).
For example: If you set your humidity at 40%, the 35% and
40% LED’s will be illuminated.
• Once you have set your desired humidity, the unit will operate
under this setting until the unit is turned off or your selected
humidity is reached.
• When the desired room humidity has been reached the fan will
automatically shut off. (The humidity LED's will remain
illuminated)
• The fan will turn back on when your room decreases beyond
your set level.
NOTE: Your room humidity can often fluctuate. It is normal for
your unit to turn itself on and off throughout the day as it is
monitoring your changing environment.
To go back to Continuous Mode, turn your unit off and then back
on and select your desired output setting (see Step 2).
Fig. 6
Fan Speed
Control
Humidistat
Control
Power
Button
Fig. 7
Fig. 8
QuietCare_OM_Rev2.qxd 5/16/06 5:47 PM Page 6