Honeywell EN1Z0909GE51 R0708 Air Cleaner User Manual


 
COACH INSTALLATION GUIDE
7 EN1Z-0909GE51 R0708
INTRODUCTION
The COACH software program is provided on the CentraLine Software CD-ROM,
and must be installed on to the hard drive of the computer in order to run the
program.
CAUTION
Before you install the software, please follow the instructions
described under System Requirements to make sure that COACH
software will be working properly.
CONTENTS OF THE CD
The CD delivered from the factory is empty and contains only a voucher.
Please request the software and the following documents from the local CentraLine
field focus people:
Installation guide (.pdf)
User guide previous COACH version (.pdf) in local language
Product datasheet (.pdf)
The COACH version name and a corresponding voucher number for the licensing
process define the right to use this software product.
SYSTEM REQUIREMENTS
Hardware Requirements
PC with the following minimum specification:
An IBM compatible PC with Pentium 1.5 GHz processor
1 GB RAM
20 GB free hard disk space
2 MB VGA supporting 64k colors at 800 x 600 resolution
LonWorks Network Interfaces, see “LON Interfaces” section
Serial port for modem connection
Pointing Device – Mouse (serial, PS/2, or USB)
Optional
Printer – any printer with Microsoft® Windows support
Software Requirements
Windows XP Professional including Service Pack 2
Word 2003 or higher
IMPORTANT
Make sure that all Microsoft security updates are manually installed on a
regular basis.
CAUTION
Changes or deinstallation made to any of those prerequisite software after COACH
has been installed, may cause malfunction and result in a new installation of
COACH.
IMPORTANT
If necessary, please contact your I.T. department for the relevant
information and advice.