Filter
Top Products
13 69-0333—6
24-HOUR PROGRAM DIAL
(GRAY AREA FOR NIGHT SETTINGS)
FLIP-UP
COVER
PROGRAM
PINS
THERMOSTAT
COVER
PROGRAM
PIN SLOT
PROGRAM INDEX WHEEL
TIME INDICATOR ARROW
PROGRAM
PIN STORAGE
M8748
Fig. 4—Program components.
Setting the heating program:
• Decide when you want the temperature to
reach the comfort level. Find the notch on
the dial that is one-half hour before this time
and insert a red pin. The half-hour head
start gives the furnace time to heat the
house before you wake up or arrive home.
• Decide when you want the energy saving
period to start and insert a blue pin at the
notch that corresponds to this time. After the
blue pin engages, the furnace will be off
until room temperature drops to the energy
saving setpoint.
• You can set both a day and a night program.
See Fig. 5 for programming examples.