Filter
Top Products
UtilityPRO
TM
Series
9
Getting Started
9
UtilityPro
®
Features
9
Fan Settings
Press FAN to select fan operation, then press
DONE.
• ON: Fan is always on.
• Auto: Fan runs only when the heating or
cooling system is ON.
• Circ: Fan runs randomly, about 35% of the
time, not counting any run time with the
heating or cooling system.
You can press FAN to override the fan settings
you’ve programmed for different time periods.
If you select ON or Circ, the setting you select
remains active until you press FAN again to
select Auto.
Press FAN
SCHED HOLD CLOCK SCREEN USAGE
WED
AM
SYSTEM
HEAT
Following
Schedule
Inside
Set To
70
6:01
70
FAN
AUTO
Note: If a fan schedule is programmed,
“Auto” runs the fan schedule.