Filter
Top Products
7
SETSET
SETSET
SET
123 123
123 123
123
GROUPSGROUPS
GROUPSGROUPS
GROUPS
SUU SUU
SUU SUU
SUU
Pressing the ent key will implement the status shown.
If a code, keyfob or tag is used while an entry timer is running or an alarm is in progress, the
group that is active will be unset immediately, without any status needing to be changed on the
keypad.
Menu Access
To access the other functions of the system, users can enter the menu mode by typing their
PIN code and pressing the ent button. This will display the first menu item after showing
system status for 5 seconds.
10 = Setting10 = Setting
10 = Setting10 = Setting
10 = Setting
[ent] to Select[ent] to Select
[ent] to Select[ent] to Select
[ent] to Select
Users can then navigate around the menu using the scroll keys, ent key and esc key, or they
can jump to any specific menu item directly by typing the number of the item. An overview of
all the accessible functions is shown below. Not all users will be able to access all of the
functions. This will depend on their ‘user type’ that is set up in menu 42.
Table 1. Menu Access
The function of each menu item is described in the following pages.
S = SET
U = UNSET
Setting and Unsetting With Group Choice
With group choice, setting is initiated as normal, using a code, tag or fob. However, a choice of
groups will then be displayed along with the current status of each group.
The status can be changed for each group by pressing the appropriate number button and the
display will cycle through the possible options.
10 = Setting 20 = Display 30 = Test 40 = Modify
11 = Omit Zones 21 = Zone Status 31 = Walk Test 41 = Time/Date
12 = Timed Set 22 = View Log 32 = Output Test 42 = Users
13 = Part Set 23 = System Version 44 = Mobile Nos
14 = Night Set 24 = Print 47 = Remote Access
15 = Chime 48 = Level 3 Access