Filter
Top Products
- 8 -
- 9 -
COOLING OPERATION
Use the device for cooling when the outdoor temperature is 21-43
°
C.
If humidity is very high (over 80
°
C) indoors, some dew may form on the air outlet grille of the indoor unit.
1
3
2
STOP
Press the button so that the display indicates
(COOL).
Set the desired FAN SPEED with the (FAN SPEED) button
(the display indicates the setting).
(AUTO) : The FAN SPEED is HI at fi rst and varies to MED or
LOW automatically when the preset temperature
has been reached.
(HI) :Economical as the room will become cool quickly.
(MED) :Fan speed slow.
(LOW) :Fan speed slower.
Set the desired room temperature with the TEMPERATURE
button (the display indicates the setting).
˚
C
The range of 25-28
°
C is recommended as the
room temperature for cooling.
If the temperature setting is 27
°
C, the room
temperature will be controlled at around 27
°
C.
The temperature setting and the actual room temperature may
vary somewhat depending on conditions.
Press the (COOLING) button. Cooling operation starts with a
beep. Press the (STOP) button to stop operation. The cooling
function does not start if the temperature setting is higher than
the current room temperature (even though the (OPERATION)
lamp lights). The cooling function will start as soon as you set the
temperature below the current room temperature.
As the settings are stored in memory in the remote controller, you only
have to press the (COOLING) button next time.
■