Filter
Top Products
- 12 -
- 13 -
ENGLISH
AIR FLOW LOUVERS ADJUSTMENTS
1. Adjusting the left and right air flow directions
Move the vertical air flow louvers as illustrated, to
adjust the air flow to flow towards the left or right
directions.
Horizontal air deflector
Vertical air defl ector
2. Adjusting the downward air flow direction.
During the "Dehumidifying" or "Cooling" operating
modes, the horizontal air flow louvers are
automatically adjusted to suit the air flow angles
of each operating mode. The air flow louvers are
designed to direct air fl ow in upward and downward
directions. Pressing the automatic air flow control
button, these air flow louvers can also be adjusted
to any air flow angle of one
’
s choice.
Press the AUTOMATIC AIR FLOW DIRECTION
once will activate the horizontal air fl ow louvers to
direct the air fl ows upwards and downwards.
Press the control button again, the horizontal air
flow louvers will stop moving and remain fixed at
the position at the point when the control button
was pressed.
During the
“
Dehumidifying
”
or
“Cooling”
operating
modes, set the horizontal air flow louvers to
move within the range as recommended in the
illustration.
Adjusting the air flow louvers will direct air flows
to assist in reducing the room temperature and to
correct any temperature imbalance.
During the
“Cooling”
operating mode, do not adjust
the horizontal air flow louvers to swing outside the
range as indicated by arrows in the illustration.
Do not operate the horizontal air flow louvers in
durations longer than it is necessary. Condensate
may form and drip along the horizontal air flow
louvers.
After stopping the operations of the unit by
pressing control button, the horizontal air flow
louvers will move to park at a position that covers
up the air outlet vent.
While the automatic air flow direction mode is in
operation, any physical adjustment to the horizontal
air fl ow louvers will shift the swing range. However,
with no further physical adjustments, the air flow
louvers will readjust automatically to the original
swing range setting. (Should the louvers could not
return to the original swing range setting, stop the
operation of the air conditioner unit, remove the
power supply plug and re-plug it into the power
mains socket and restart the air conditioner unit.
This will return the swing range to its original
setting.)
level
about