— 14 —
English
The NT50AF Pneumatic
Flooring Nailer, with the
standard shoe, drives 1‑1/2”
and the 2” T or L nails into
the tongue and groove
flooring at a 45 degree
angle. The orientation of
the fastener is as depicted
above.
The N5009AF Pneumatic
Flooring Stapler, with the
standard shoe, drives 1‑1/2”
and the 2” staples into the
tongue and groove flooring
at a 45 degree angle. The
orientation of the fastener is
as depicted above.
Fastener Application Chart
FASTENER APPLICATION T&G FLOORING
THICKNESS
2” T‑Nail / L‑Nail /
Staple
Angle Fastener onto
5/8” ‑ 3/4” under‑
layment over joist
construction
Surface (face) Fas‑
tener onto 5/8” ‑ 3/4”
underlayment over
joist construction
3/8”, 1/2”, 9/16”, 5/8”,
3/4”, 33/32”
1‑1/2” T‑Nail / L‑Nail /
Staple
Angle Fastener onto
5/8” ‑ 3/4” underlay‑
ment over concrete
slab or hydronic heat‑
ing systems
Surface (face)
Fastener onto 5/8” ‑
3/4” underlayment
over concrete slab
or hydronic heating
systems
3/4”, 33/32”
33/32”