Filter
Top Products
Specifications - 50 FM5 Operator’s Manual
CMW
Specifications are called out according to SAE recommended practices. Specifications are general and
subject to change without notice. If exact measurements are required, equipment should be weighed and
measured. Due to selected options, delivered equipment may not match that shown.
Engine U.S. Metric
Honda GX160, gasoline
Cooling medium air
Number of cylinders 1
Displacement
9.9 in
3
162 cm
3
Bore 2.7 in 69 mm
Stroke 1.8 in 46 mm
* Maximum tilt angle fore & aft 35°
* Maximum tilt angle side 35°
Flywheel power @ 3600 rpm 5.5 hp 4.1 kW
* Exceeding these operating angles will cause engine damage. This DOES NOT IMPLY machine is stable to maximum angle of
safe engine operation.
Fluid Capacities U.S. Metric
Fuel tank .95 gal 3.6 L
Engine oil, including filter 0.63 qt 0.6 L
Drilling fluid/mixing tank capacity 300 gal 1136 L
Noise levels
Operator 91 dBA sound pressure per ISO 6394
Exterior 105 dBA sound power per ISO 6393.