Hellenbrand TS Series Water System User Manual


 
1. One-Inch or Inch and One-Half NPT Inlet Connec-
tion.
2.
One-Inch or Inch and One-Half NPT Outlet Connection
.
3. Stainless Steel Backplate will not rust or corrode.
4. Factory installed Drain Line Flow Control maintains
accurate backwash rates.
5. Solid Brass Valve assures durability and long life.
6. Self Cleaning Teon-coated Piston allows foreign
particles to pass through without damaging the unit.
It is hydraulically balanced to equalize pressure on
both sides of the piston, allowing it to shift smoothly
regardless of water pressure. Plastic spacers and rub-
ber seals protect the piston from sediment in water.
7. Separate“Time-ll”Briningwithaccurateowcontrols
allowsautomaticbrinetankrell.BrineTankRellRates
are easily adjustable on the cycle programmer.
8. Heavy-duty Drive Motor receives signal from timer to
efcientlydirectwaterowduringregeneration.Piston
shifts smoothly and quietly regardless of water pres-
sure.
9. TS Series Timer provides fully automatic, dependable
timing for regeneration. The Cycle Programmer regu-
lates all regeneration cycles which are easily adjustable.
For manual regeneration start, simply turn the service
indicator clockwise. No need to push any buttons or
reset timer. NOTE-Complete manual operation, without
electricity is also available.
10. Flow Director for mechanical meter applications ac-
curatelydirectsowevenunderlowowconditions.
Not shown in photo.
11.
ToughSpaceAge,Corrosion-resistantplasticregistersow
even during power outages with mechanical meters.
Hellenbrand Means
Quality and Reliability
The only Waunakee in the world, a village of nearly 7,500 people in South Central Wisconsin, is the home of Hellenbrand
WaterConditioners.Waunakee,anIndiannamethatmeans“peacefulvalley”,istheidealsettingforacompanywith
neighborly, small town concern for its customers and dealers. Since it opened its doors in 1967, Hellenbrand has offered
somethingyourarelyndanywheretoday—well-designed,qualityproductsbackedupwithfast,reliableservice.Here
areseveralimportantbenetsthatgointoHellenbrandTSSeriesConditioners.
TS Series Conditioners use a top-mounted, one-inch or inch and one-half inlet and outlet solid brass valve with a motor
-
driven,time-tested,hydraulically-balancedpistonandsealandspacerconcepttopilotserviceownotdependenton
waterpressure.It’sclean,direct-operating,andreliable.Theyhavefactory-wiredelectricalsystemstoassureeasyinstallation.
The TS Series offers you a choice of complete manual operation, fully-automatic time clock operation, mechanical meter
demand systems or microprocessor meter demand systems.
An optional new piston design is available which prevents hardwater by-pass during the regeneration cycle of the
softener.The“nohardwaterby-passpiston”willnottaketheplaceofanadditionallockoutcontrolvalveforalternating
purposes.
TS Series 1" OR 1-1/2" NPT Control Valve
(TS Series 1-1/2" Control With System Four 1" Econominder Meter Shown)
2
9
8
3
4
7
6
5
1
11