Hellenbrand TNT Series Water System User Manual


  Open as PDF
of 8
 
TNT Physical Specications
DEALER NAME:
RECOMMENDED BRINE TANK MINERAL TANK APPROXIMATE
PIPE SIZE MINERAL TANK SIZE
SALT STORAGE
GRAVEL UNDERBEDDING SHIPPING WEIGHT
MODEL (INCHES) (INCHES) (INCHES) ( LBS) 1/4" X 1/8" #20 SINGLE TWIN
TNT-300-24 3 24 X 72 30 X 50 1,110 0 150 1085 2145
TNT-300-30 3 30 X 72 30 X 50 1,110 200 75 1160 2295
TNT-450-30 3 30 X 72 39 X 48 2,030 200 75 1600 3120
TNT-450-36 3 36 X 72 39 X 48 2030 300 150 1835 3590
TNT-600 3 36 X 72 39 X 48 1,640 300 150 2115 4135
TNT-750 3 42 X 72 42 X 60 2,580 500 175 3475 6325
TNT-900 3 42 X 72 50 X 60 4,130 500 175 4280 8560
TNT-1200 3 48 X 72 50 X 60 3,495 700 200 4800 8760
Mineral tank sizes shown are with composit/FRP tanks.
RATED CAPACITY FLOW RATES (gpm)
RESIN LOW SALT MEDIUM SALT HIGH SALT BKW
MODEL CU.FT. GRAINS/LBS GRAINS/LBS GRAINS/LBS 15 PSI 25 PSI GPM
TNT-300-24 10 190,000/60 280,000/100 320,000/150 120 170 12
TNT-300-30 10 190,000/60 280,000/100 320,000/150 175 225 20
TNT-450-30 15 285,000/90 420,000/150 480,000/225 158 212 20
TNT-450-36 15 285,000/90 420,000/150 480,000/225 200 278 30
TNT-600 20 380,000/120 560,000/200 640,000/300 189 257 30
TNT-750 25 475,000/150 700,000/250 800,000/375 212 280 40
TNT-900 30 570,000/180 840,000/300 960,000/450 215 282 50
TNT-1200 40 760,000/240 1,120,000/400 1,280,000/600 213 280 50
TNT Capacity Ratings
1. Steel tank design congurations available up through 60” tank diameters. Consult factory for details.
OPERATING CONDITIONS
1. Water Pressure 30 - 100 psi.
2. Water temperature is not to exceed 110°F and the unit cannot be subject to freezing conditions. Consult factory for higher water temperature applications.
3. Limit of 2 ppm of Ferrous Iron. Add 3 grains per gallon of hardness for each ppm of iron present.
4. Flex connectors and vacuum breakers are required when using the PolyGlass Composite mineral tanks.
5.Backwashowratesarecalculatedat4gpmpersq.ft.ofbedareaandroundedoffbasedon50ºFwatertemperature.
6.
Refer to Hellenbrand Bulletin 2050 “Flow Rates and Soft Water Quality (Hardness Leakage) if your application requires that levels of hardness leakage do not exceed “x”
.
TNT Series Fiberglass Dimensions
with Six-Inch Flange Opening
106612
1/09-LBRY
TNT-300-24 101 87.5 82.5 51 62 99
TNT-300-30 101 87.5 80 51 68 108
TNT-450-30 112 96.5 80 51 83 117
TNT-450-36 112 97 81 51 83 129
TNT-600-36 112 97 81 51 83 129
TNT-750-42 113 104.5 92 51 92 144
TNT-900 113 104.5 92 51 92 144
TNT-1200-48 116 103 93 51 106 164
All dimensions ±1” and are subject to change without notice. Use as reference only.
*Allow additional 12” for resin lling on HT dimension.
**Allow additional 18” for resin lling on HS dimension.
Call factory for optional tank & dimensional congurations.
Product Improvement designs are subject to change without notice.
HELLENBRAND, INC.
1-800-626-1417
www.hellenbrand.com
HEIGHT INLET/OUTLET HEIGHTS SUGG. WIDTH
TOP MOUNT SIDE MOUNT TOP MOUNT SIDE MOUNT SINGLE TWIN
MODEL HT* HS** IT IS
 previous