Heatmaster 200 N Water Heater User Manual


 
1
INDEX INTRODUCTION
INTRODUCTION 1
Target group 1
Symbols 1
Certification 1
Information and safety instructions 2
USER GUIDE 2
Use of the boiler 2
DESCRIPTION 3
Operating principle 3
Packing 3
Construction features 4
TECHNICAL SPECIFICATION 5
Effective dimensions 5
General characteristics 5
Hot water output data 6
Limits of operating conditions 6
Burner chamber plate 6
INSTALLATION 7
Boiler room 7
Chimney connections 7
Hot water connections 8
Heating connection 9
Oil supply connections 9
Electrical connections 10
Wiring diagram 10
COMMISSIONING 11
Filling the hot water and heating circuits 11
MAINTENANCE 11
Service intervals 11
Servicing the boiler 11
Servicing the safety devices 11
Servicing the burner 11
Draining the boiler 12
SAFETY MODE 12
Placing the burner in safety mode 12
Placing the boiler in safety mode 12
SPARE PARTS 13
Jackets 13
Accessories 13
SERVICE RECORD 14
Details of the installation 14
Service notes 14
CERTIFICATION
The appliances carry the “CE” mark, in accordance with the
standards in force in the various countries (European Directive
92/42/CEE “Efficiency”).
TARGET GROUP
This manual is intended for the use of:
- final users of the appliance;
- the engineer installing and starting up the appliance;
- the engineering and design department;
- the installer responsible for servicing or maintaining the appliance.
SYMBOLES
The following symbols are used in this manual:
DANGER
HOT
Essential instruction for operating the system
correctly.
Risk of scalding.
Danger of electrocution.
Essential instruction for personal safety or
environmental protection.