Filter
Top Products
55Heatilator • CD4236IR-C, CD4842IR-C • 2207-900 Rev. J • 11/11
G. Install the Log Assembly
LOG PLACEMENT INSTRUCTIONS
Log Set Assembly: LOGS-4236, LOGS-4842
Models: CNXT4236IT-C, CNXT4842IT-C,
CNXT4236IH-C, CNXT4842IH-C
CD4236IR-C, CD4842IR-C
1. Base logs have been permanently mounted on the
grate assembly. Do not attempt to remove or relocate
the logs. See Figure 1.
2. Be sure the left end of log A is not covering ports.
Slide the left end of log A back if it’s covering ports.
See Figure 2.
3. Left log placement (SRV2208-705) : Mate rear and front
faces of left log with indentations on rear and base logs
as shown in Figure 2 and Figure 3. Slide the left log
back.
4. Right log placement (SRV2208-706) : Place the right log
by positioning the front “V” of the log on the indentation
on the base log and resting the rear of the log on the
fl at area of the rear log. See Figure 2 and Figure 4.
5. Figure 4 shows the Left and Right Logs properly placed.
Both Left and Right Logs should sit securely on the rear
and corresponding base logs.
Figure 1. Base Logs
CAUTION: Logs are fragile, handle with care.
Log A: SRV2208-702
Log B: SRV2208-703
Log C: SRV2208-704
Log D: SRV2208-073 (4236 models)
SRV2211-073 (4842 models)
BASE LOG
BASE LOG
REAR FACE
REAR FACE
FRONT FACE
FRONT FACE
REAR LOG
REAR LOG
FRONT “V”
FRONT “V”
RIGHT LOG
RIGHT LOG
LEFT LOG
LEFT LOG
REAR LOG
REAR LOG
FLAT
FLAT
AREA
AREA
BASE LOG
BASE LOG
Figure 2. Left Log and Right Log Reference Points
Figure 3. Left Log in Proper Position Figure 4. Left and Right Log in Proper Position
D
D
A
A
C
C
B
B
D
D
A
A
C
C
B
B
LOG A
LOG A
SHOULD NOT
SHOULD NOT
COVER ANY
COVER ANY
PORTS
PORTS