Filter
Top Products
-4-
598-1144-02
Tune Settings
Your Heath
®
/Zenith wireless chime has different selectable
tunes: Ding (one note), Ding-Dong (two note), or Westminster
(eight note) (Available on selected Heath
®
/Zenith chimes).
The factory setting is for the Ding-Dong tune (or Westminster,
when available). This tune can be changed by following the
instructions below.
• Ding (one note tune)
Push button: Add a jumper to location 8.
• Ding-Dong (two note tune)
Push button: Remove jumper from location 8.
Chime: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected
Heath
®
/Zenith chimes)
Push button: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: To ring different tunes on the same chime, do the
following:
1. Set the bottom button code to match the top button code on
the dual push button.
2. Set the chime code to match the push button codes.
3. Set the tune settings for the top and bottom buttons per the
instructions above.
We recommend the back door use the Ding tune and the front
door use the Ding-Dong tune (or Westminster tune, available
on selected Heath
®
/Zenith chimes).