Filter
Top Products
2
598-1277-02
INSTALLATION
Estimated Installation Time: 30 minutes
Items needed for installation (not included):
• Phillipsandatheadscrewdrivers
• Pliers •Wirestrippers/cutters
• Safetyglasses •Lightbulb
• Siliconecaulk
For best performance, mount the fixture about
6 feet (1.8 m) above the ground.
1. Remove
two nuts.
2. Remove
X-Bar.
Junction
Box
5. Attach X-Bar to
junction box
Due to the size and weight of the fixture, you
may find it helpful to have an assistant hold the
fixture in place while connecting the wires.
MAX
MIN
3. Tighten screws
finger tight.
SENSITIVITY
4. Set sensitivity on fixture
back to the mid-position.
WARNING: Turn power off at circuit
breaker or fuse.
Mode Switching Summary
Du a l Br i t e
®
Dimmer Control
Light comes on half bright for selected time
after dusk (Off, 3 hr., 6 hr., until dawn).
Selecting OFF disables this feature. The
motion sensing features will continue to
work as described in this manual. If motion
is sensed, the light turns on full bright for the
ON-TIME (1, 5, or 10 minutes) then returns
to dim mode.
ON-TIME Switch at 1,
5, or 10 minutes
Flip light switch
off for one second
then back on*
* If you get confused while switching modes,
turn the power off for one minute, then back
on. After the calibration time the control will
be in the AUTO mode.
MANUAL MODE
AUTO
TEST