Heath Zenith SL-4290 Series Home Safety Product User Manual


  Open as PDF
of 24
 
Du a l Br i t e
®
Motion
Sensing Diecast
Lantern
© 2008 HeathCo LLC 598-1277-02
OPERATION
* resets to Auto Mode at dawn.
Set the ON-TIME switch
on the bottom of the cover
plate to TEST.
TEST 1 5 10 MIN
Set ON-TIME switch to
1, 5, or 10 minutes.
1 Second
OFF then...
Manual mode only works at
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for
one second then back on to
toggle between AUTO and
MANUAL MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 10 position.
... back on.
Note: When first turned on wait about 1
1
/
2
minutes for the circuitry to calibrate.
TEST
AUTO
MANUAL MODE
TEST 1 5 10 MIN
Mode: On-Time Works: Day Night
Test
5 Seconds x x
Auto
1, 5, or 10 Min x
Manual
To Dawn* x
Accent
3,6 Hr. to Dawn x
Before installation, record the model
number from back of fixture below.
Attach receipt in case of possible war-
ranty issues.
Questions or problems? Before returning
to your retailer, refer to the troubleshooting
guide in this manual or call our technical ser-
vice department at 1-800-858-8501 (English
speaking only), 7:30 am to 4:30 pm, CST,
Monday – Friday.
Features
• Lightcomesonwhenmotionisdetected.
• Automaticallyturnslightoff.
• DuskAccentlighting.
• Photocellkeepsthelightoffduringdaylight
hours.
Package Contents
• Lantern
• UniversalMountingBracket
• MountingScrews(Includesextralongscrew
studs for recessed junction box mounting)
• WireConnectors
Requirements
• Thelightcontrolrequires120voltsAC.
• IfyouwanttouseManualMode,thecontrol
must be wired through a switch.
• Some electrical codes require installa-
tion by a qualified electrician.
ON-TIME
ON-TIME
SL-4290 Series
Meets the ENERGY STAR
®
guidelines when Du a l Br i te
®
function is off.
next