Heath Zenith PF-4290 Series Home Safety Product User Manual


  Open as PDF
of 20
 
3
598-1234-02
Wiring to Motion Light &
Standard Fixture
BLACK
WHITE
BLACK
(Standard)
❒ When wiring to additional standard
xture only: Strip the motion sensor's
red wire and connect to the standard
light's black wire. Connect all white wires
together. Total xture ratings must not
exceed 360 Watts (3.0 A.).
Note: All wiring between xtures should
be run in accordance with the National
Electrical Code (Canadian Electrical Code
in Canada) through conduit or another
acceptable means. Contact a qualied
electrician if there is any question as
to the suitability of the system.
❒ Thisxtureisprovidedwithasensorrated
for360Watts.Sincethextureisonlyrated
100 Watts, 260 Watts of additional load may
be controlled by this sensor.
❒ Whendeterminingwhataxtureisrated
for, do not simply look at the rating on the
lampinthexture.Lookatthemarking
whichspeciesthemaximumlampwatt-
ageforwhichthextureissuitable.
❒ Onceyouhaveselectedthexturestobe
connected and determined their maximum
ratings, add these ratings up. For instance,
ifyouhave3xturesrated100Watts,150
Watts, and 75 Watts respectively, you have
a total load of 325 Watts.
RED
WHITE
BLACK
BLACK
Master
Slave
Wiring to Control One Motion Sensing
Lantern (Slave) from Another (Master)
It is also possible to wire two motion sensing coach lights so that either unit will turn on
both lights at the same time (dual master system). It is recommended that only people with
plentyofelectricalexperienceattemptthisconguration.Pleasecallourcustomerservice
number (1-800-858-8501 - English Speaking Only) before attempting this wiring. If the dual
master wiring is not done correctly, it can destroy both motion sensing xtures and
void your warranty.
RED
OPTIONAL WIRING
WHITE
WHITE
RED
 previous next