Filter
Top Products
-4- 595-5724-04
12345678
12345678
Inside
Sensor
Remove screw to
open access door
Back of Chime
Tune Setting
Tune Setting (Not
used on all models)
Note: Some models might require
the use of tweezers to remove and
replace the jumpers.
Tune Settings
Your Heath
®
/Zenith wireless chime has different selectable tunes: Ding (one
note), Ding-Dong (two note), or Westminster (eight note) (Available on se-
lected Heath
®
/Zenith chimes). The factory setting is for the Ding-Dong tune
(or Westminster, when available). This tune can be changed by following the
instructions below.
• Ding (one note tune)
Sensor: Add a jumper to location 8.
• Ding-Dong (two note tune)
Sensor: Remove jumper from location 8.
Chime: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected Heath
®
/Zenith
chimes)
Sensor: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. You may pur-
chase any Heath
®
/Zenith wireless push button for a second entrance.