Heath Zenith 598-1172-04 Door User Manual


  Open as PDF
of 24
 
-3-
598-1172-04
TYPE ‘D’
LR20
TYPE ‘D’
LR20
TR-0035-RX
Screw
Mounting
Orientation
Marking
Cover Pin Locations
Mounting Hole
WallAnchor
(If Needed)
Mounting Hole
8. Mount chime. Determine mounting loca-
tion.
• Placechimeagainstwallandverifythe
chimeislevel.Note: See chime base for
correctorientation.
• Useall4chimemountingholesasa
template(seeFigure8).Note: 2 mount-
ing holes are located inside battery
compartment.Removebatteriesbefore
mounting.
• Drill7/32"diameterpilotholesforwall
anchors(provided)andinsertanchors.
Note: Alwaysusewallanchorsifnot
mountingdirectlyintoastud.
Figure 8
• Verifychimeislevelandtightenscrews
securely.
• Installbatteriesremovedpreviously.
Make sure batteries are oriented prop-
erly(seeFigure4).
• Placechimecoverontochimebase
(Seestep6todeterminecovermount-
ingtype).
 previous next