Heath Zenith 598-1109-06 Door User Manual


  Open as PDF
of 28
 
-3-
598-1109-06
Basic Chime:
1. Remove batteries from chime.
2.Placechimeagainstwallandverifythechimeislevel.
3.Usechimeholesasatemplate(seeFigure5).Drill7/32"diameterpilothole
for2wallanchors(provided)andinsertanchors.
4.Insert2screws(provided)throughholesinbackofchime.
5.Usingarrowinsidechimeunitasaguide,mountchimewitharrowpointing
up(seeFigure5).Donottightencompletely.
6.Verifychimeislevelandtightenscrewssecurely.
7.Replacebatteries(seeFigure3).Snapcoverontochimebase.
1 2 3 4 5 6 7
ON
Holes
forWall
Mounting
Figure 5
Mount
ChimeUnit
withArrow
Pointing Up
1 2 3 4 5 6 7
ON

1.SlidecoverpinontorearofchimeasshowninFigure6.Pinmustbeassem-
bledtobasepriortomountingbasetowall(pinmaybepre-assembled).
2.Followdirectionsunder“BasicChime”tomountchimebasetowall.
3.Hangcoveroncoverpin.
Figure 6
TopofChime
BackofChime
CoverPin
CoverPin
Installed on
ChimeBack
 previous next