Heath Zenith 598-1067-03 Door User Manual


  Open as PDF
of 24
 
-5-
598-1067-03
12345678
Removescrewto
open access door
BackofChime
4.Tochangethecode,either(Formodelswith2pushbuttons,changecode
setting in both push buttons to match chime.):
• Addajumpertothesamelocationonboththepushbuttonandthechime
or...
• Removeajumperfromthesamelocationonboththepushbuttonandthe
chime or...
• Moveajumperonthepushbuttonfromonelocationtoanother.Movethe
correspondingjumperonthechimetomatchthenewlocationinthepush
button.
Example: Move jumper at location “5” to location “4” on both the push
button and the chime.
Note:

Note:Unitwillcomefactorysetwithjumpersinlocations5,6,and7onthe
push button and on the chime (see Figure 5).
Therangeofthewirelesschimecanvarywithlocation,temperature,and
battery condition.
* Code Settings 1-7
MustMatchBothPush
ButtonandChime
InsidePush
Button
Note: Some models might require the use of
tweezerstoremoveandreplacethejumpers.
Figure 5
12345678
 previous next