Heath Zenith 595-5707-06 Door User Manual


  Open as PDF
of 24
 
-5-
595-5707-06
3. Tochangethecode,either:
• Addajumpertothesamelocationonboththepushbuttonandthechime
or...
• Removeajumperfromthesamelocationonboththepushbuttonandthe
chime or...
• Moveajumperonthepushbuttonfromonelocationtoanother.Movethe
correspondingjumperonthechimetomatchthenewlocationinthepush
button.
Example: Move jumper at location “5” to location “4” on both the push
buttonandthechime.
Note:Codepositions1through7mustbeexactlythesameforboththe
pushbuttonandchimeforthissystemtofunction.
Note:Unitwillcomefactorysetwithjumpersinlocations5,6,and7onthe
pushbuttonandonthechime(seeFigure9).
Therangeofthewirelesschimecanvarywithlocation,temperature,and
batterycondition.
Battery
Battery
Battery
12345678
* Code Settings 1-7 Must Match
Both Push Button and Chime
Inside Push
Button
Inside Chime
Note: Some models might require the use of
tweezerstoremoveandreplacethejumpers.
Figure 9
12345678
Add jumper for
back door Ding
or remove for
front door Music
Selection (for
modelswith2
push buttons only)
 previous next