© 2008 HeathCo LLC 595-5707-06
Model 6164
Type “D”
Type “D”
Type “D”
Chime Volume
This package includes (Style of push button and chime may vary from illustration):
• Wirelesschime
• Wirelesspushbuttonwithbattery
• Hardwarepack
This chime requires 3 “D” alkaline batteries (not included). In typical use,
alkalinebatterieswilllastuptothreeyears.
Wireless Musical
Chime
Figure 1
WARNING: To prevent possible
SERIOUS INJURY or DEATH:
• NEVER allow small children near
batteries.
• Ifbatteryisswallowed,immediately
notifydoctor.
1. InstallalkalinetypeA2312voltpushbutton
battery(included). Remove back of case by
pushingintabonbottomwithasmallscrew-
driver(seeFigure1).Seediagraminsidepush
buttonforcorrectbatteryorientation.Note: If
batteries are preinstalled, remove orange
batterytab.
2. Openchimecase. Press in both catches on
the bottom of the chime and lift the case open
(seeFigure2).
3. Install 3 alkaline “D” batteries. Make sure
batteriesareorientedproperly(seeFigure3).
4. Test range. Temporarily position chime and
pushbuttonwhereyouwantthemmounted.
Press push button to verify chime and push
buttonworkproperly.Ifchimedoesnotsound,
see Troubleshooting.
5. Adjust volume control. Adjust volume control
todesiredvolume(seeFigure3).
Figure 2
Figure 3